Raimondi Double Re-Usable Tile Spacer - 1 & 3mm (grey) or 2 & 5mm (red), 300 pack

Raimondi DOUBLE: a removable, reusable spacer that gives two joint widths from one piece. Grey makes 1 mm or 3 mm joints (Raimondi 282D1-3C300), red makes 2 mm or 5 mm (282D2-5C300). Each comes as a resealable bucket of 300.

Place the spacers along the tile edges as you lay, then once the adhesive has firmed up, pull them out clean and drop them back in the bucket for the next job. Because one spacer covers two joint widths, a single bucket does the work of two bags of throwaway spacers.

• Two sides of the spacer set one width, the other two sides set the other — flip it to switch joint size
• Colour coded: grey = 1 mm / 3 mm, red = 2 mm / 5 mm, so there's no mixing up widths mid-job
• Used along the tile edges rather than at the corners, which suits large format tiles and offset/brick-bond layouts
• One flat face, so it sits flush against the floor, in corners and on walls
• Generous 37 x 37 mm size: easy to grab when placing and pulling out, even with adhesive on your gloves
• Most of the spacer sits above the tile and the plastic will not bond to thin-set adhesive, so it pulls out clean and can be reused job after job
• Suits walls and floors, interior and exterior tiling

Specifications

• Joint widths: 1 & 3 mm (grey) or 2 & 5 mm (red)
• Spacer size: 37 x 37 mm
• Pack: resealable bucket of 300
• Raimondi part nos.: 282D1-3C300 (grey), 282D2-5C300 (red)

Codes: RAI-DS13300, RAI-DS25300